CTEK D250TS Dual DC-DC 10amp 24V Battery Charger

CTEK supplies innovative battery charges for all purposes. The
CTEK D250TS Dual DC-DC 10amp 24V Charger continues
the tradition of offering chargers with a focus on simplicity,
safety and versatility. The D250TS is a fully automatic battery
charger, battery separator, 12V converter and an equaliser for 24V
battery banks combined. Perfect for heavy vehicles, RV’s, boats and
other vehicles.

The CTEK D250TS is a fully automatic 4-step
charger that supplies 10A to 24V batteries of 20-200Ah. The charger
is IP65 classified (water jet and dust protected and approved for
outdoor use) and protects vehicle electronics. It is suitable for
all types of lead-acid batteries (Wet, MF, Ca/Ca, Gel, AGM). It is
supplied with a 2 year warranty.

CTEK D250TS Dual DC-DC 10amp 24V Charger
Features:

• Auto: Fully automatic for optimal charging
• 24V: For all lead-acid batteries
• Male terminal (grey) 2pcs 14,5 mm
• Male terminal (black) 2pcs 14,5 mm
• Temp sensor
• Status signal wire

CTEK D250TS Dual DC-DC 10amp 24V Charger
Specifications:

• Volt: 24V
• Input voltage: 14-30V
• Charging voltage: 28.8 V at 25 degreesC, temperature
  compensated. Voltage reduced at higher voltage, increased at
  lower
• Charging current: 10A max
• Back current drain: <1Ah/month
• Equalization current: Max 10 A, average pending time used for
  Starter battery charging
• Equalization voltage: 50 % of input voltage
• Ripple: <4%
• Ambient temperature: -20 degreesC to +50 degreesC, output power
  is reduced automatically at high temperatures
• Charger type: 4 step, fully automatic DC/DC charger
• Battery types: All types of 24V lead-acid batteries (WET, MF,
  Ca/Ca, AGM and GEL)
• Status signal: +24 V ON when D250TS is working properly. Max
  current 500 mA
• Battery capacity: 28-200 Ah
• Dimensions: 197 x 93 x 49mm (L x W x H)
• Insulation class: IP65
• Weight: 0,7 kg

CTEK D250TS User Manual

CTEK D250TS Product Sheet